Since ancient times, people have paid attention not only to the value of gifts, but also to its packaging. After all, packaging is a gift impression we see first. Secondly, it plays an important role in protecting gifts. In modern society, people pay more attention to the packaging of gifts, so the use of gift boxes is more extensive. The following mainly introduces the common problems in the mounting process of gift boxes.

1、禮品包裝盒出現翹角現象。

1. Warping of gift box.

出現這種情況的主要原因是貼的張數太多，而導致紙板邊沿的膠已干而不能粘住。所以通常應在貼二十張就壓榨較為合適。

The main reason for this is that too many sheets are pasted, resulting in the glue on the edge of the paperboard has dried and can not stick. Therefore, it is usually more appropriate to press after pasting 20 sheets.

2、禮品包裝盒紙的濕度太大，特別是針對金卡的平貼。

2. The humidity of gift box paper is too high, especially for the flat sticker of gold card.

主要是由于金卡紙對水份的滲透和散失能力很差，而普通的平貼膠其含水量本身較高。所以通常用快干膠或?qū)a(chǎn)品展開置于陽光下晾曬來解決。

This is mainly due to the poor water penetration and loss ability of gold card paper, while the water content of ordinary flat adhesive is high. Therefore, it is usually solved by using quick drying glue or unfolding the product and drying it in the sun.

3、所裱瓦或平貼的禮品盒盒，假如在空氣濕度較大的環境下，放置時間稍長會出現變黃等現象。主要是由于部分廠家采用了含堿性很大的水玻璃膠或淀粉膠所致。所以為了保證禮品包裝盒的質量我們應該選用質量較好的平貼和瓦楞膠。

3. The tile mounted or flat pasted gift box will turn yellow if it is placed for a long time in an environment with high air humidity. This is mainly due to the use of sodium silicate adhesive or starch adhesive with great alkalinity by some manufacturers. Therefore, in order to ensure the quality of gift boxes, we should choose high-quality flat stickers and corrugated glue.

4、禮品包裝盒出現脫層現象，主要由于粘接劑的強度不夠所致，建議選用一些正規廠家的產品，這樣既能保證強度，減少濕度，增加挺度，又能進步禮品包裝盒產品質量和檔次。

4. The delamination of the gift box is mainly due to the insufficient strength of the adhesive. It is recommended to select the products of some regular manufacturers, which can not only ensure the strength, reduce the humidity, increase the stiffness, but also improve the product quality and grade of the gift box.

以上就是禮品包裝盒裱工藝會出現的四種常見問題，對于產品加工質量的影響都很大，需要在制作時多加注意。通常一些產品在加工過程中會使用到的工藝有很多，所以出現的問題也挺多，還需要我們多多了解，才能進一步提高它們的制作質量。

The above are the four common problems in the mounting process of gift packaging box, which have a great impact on the product processing quality. We need to pay more attention to it when making. Usually, many processes are used in the processing of some products, so there are many problems. We still need to know more about them in order to further improve their production quality.